1/2x4 Mas-Tap Hd Anchor
Kent Item # DY09992953
Brand: Kent Automotive
• One-piece heavy-duty anchor with sharp aggressive concrete cutting threads
Read More
View On Kent-Automotive.comPLEASE CONTACT
Territory Pricing:
Confirm an approved territory location to view any currently active promotional price.
Package: Pack of 5
Shipping charges as per Kent Automotive will be applicable and billed as per
your standard agreement and account setup.
Product Description
• One-piece heavy-duty anchor with sharp aggressive concrete cutting threads
• Easy to install and can be removed
• Serrated teeth under the head grip to installed fixtures
• Steel thread design provides a keyed engagement and allows for reduced spacing and edge distances
• Can be used in a variety of solid masonry materials such as concrete, brick, stone, and block
• Works with standard properly sized masonry drill bits, no special bit required
• Zinc-plated case hardened low carbon steel
1. Check specs to determine proper anchor.
2. Drill hole to proper depth. Then remove dust and debris.
3. Place anchor through fixture and into hole and begin tightening.
4. Tighten until anchor head is tightly seated against fixture.
• Easy to install and can be removed
• Serrated teeth under the head grip to installed fixtures
• Steel thread design provides a keyed engagement and allows for reduced spacing and edge distances
• Can be used in a variety of solid masonry materials such as concrete, brick, stone, and block
• Works with standard properly sized masonry drill bits, no special bit required
• Zinc-plated case hardened low carbon steel
1. Check specs to determine proper anchor.
2. Drill hole to proper depth. Then remove dust and debris.
3. Place anchor through fixture and into hole and begin tightening.
4. Tighten until anchor head is tightly seated against fixture.
Technical Specifications
| Item#: | DY09992953 |
|---|---|
| Diameter | 1/2 " |
| Length | 4 " |
| Type | Screw Anchor |
| Material | Carbon Steel |
| Minimum Embedment | 1-3/4 " |
| Finish | Zinc |
| Drive | 3/4 " |
| Drill Size | 1/2 " |
| Head Style | Hex |
| Drive Style | 3/4 " |
| Quantity Per Package | 5.0000 |
| Minimum Hole Depth | 2-1/8 " |
| UNSPSC #: | 31162104 |
| TAA Compliant: | Yes |
| Weight | 1.42 |